AVM's VDSL CPEs
Berlin/Hanover (ots)
AVM Presents Web, Telephony and Streaming Media at 50 Mbit/s- Two VDSL CPEs Debut-Internet Telephony and TV
- Debut for two combination devices: VDSL + VoIP, and VDSL + MPEG2/MPEG4 - Throughput of up to 50 Mbit/s for computers, telephones and TV - VDSL modem integrated with router, VoIP PBX, firewall, and WLAN - Video codecs for MPEG2, MPEG4 integrated with TV interface
At AVM's Cebit trade fair stand, two VDSL CPEs are making their debut, opening up possibilities never seen before. Both products implement the new VDSL standard with data speeds of up to 50 megabits per second. Thus VDSL is ideally suited for the data traffic of simultaneous web access, Internet telephony, and multiple high-resolution TV channels. With an integrated TV interface and MPEG2/4 decoder, the new VDSL CPE connects directly to a TV set. In addition to the familiar FRITZ!Box connectivity options the new products provide more digital and analog outputs for audio and video equipment.
The Technology: New VDSL at 50 Mbit/s
The new VDSL standard G992.3, with data speeds of up to 50 megabits per second, is the next big step in broadband speed. VDSL can be distributed both directly from the central office, and from local cable distribution points. The local distribution points are served by fiber optic cables (Fiber to the Curb). Near the DSLAM, or the "curb DSLAM," VDSL is available at data rates of 25 and 50 Mbit/s. Like ADSL, VDSL uses Discrete Multitone Transmission (DMT) encoding for fast data communication. DMT divides information among 4096 discrete tones in a frequency spectrum of up to 30 MHz. Currently, bandwidths of 8 and 17 MHz are used. ADSL2+, in comparison, uses a bandwidth of 2.2 MHz with 512 carrier tones, and attains throughput of 16 Mbit/s. With this encoding, the classic twin-lead copper cable continues its impressive career: just a few years ago, it was considered to have attained its maximum load at 1200 bits per second. VDSL allows the specification of different upstream and downstream data rates. This flexibility ensures maximum compatibility with existing infrastructures. Analog telephony and ISDN services can be provided alongside VDSL in the lowest frequency band. ATM (Asynchronous Transfer Mode) is not necessary in packet transfer between the VDSL modem, the DSLAM, and network routers. Direct, "raw IP" transport over VDSL increases throughput rates, and reduces infrastructure costs.
VDSL Debut No. 1: FRITZ!Box Fon WLAN 7500V
In FRITZ!Box Fon WLAN 7500V, AVM combines a VDSL modem and router, a firewall, wireless LAN, and a PBX for both Voice-over-IP and fixed-line calls. The new product was developed with special attention to optimum data throughput. A fully integrated VDSL modem achieves this objective. At the same time, modem integration simplifies installation and reduces the number of products required. The interfaces to connect telephones and computers are identical with those of AVM's current flagship product, FRITZ!Box Fon WLAN 7170. With wireless LAN, four Ethernet ports, and extensions for analog and ISDN phones, the communication options are boundless. Furthermore, fast data streaming to an external disk drive connected to the USB port is also supported. For streaming media from Internet servers, FRITZ!Box supports the Internet Group Management Protocol (IGMP). IGMP is the Internet standard for IP multicasting, the transmission of IP data streams to multiple recipients simultaneously. On the local end, AVM's VDSL product supports the IGMP proxy and IGMP snooping functions. Data communication with the Internet is Ethernet-based, and supports VLAN (Virtual Local Area Network). This allows the implementation of different quality-of-service classes for different kinds of services, such as voice, video and web applications. Among the differential service techniques supported is VLAN tagging (IEEE 802.1q), which assigns ports to data streams between the individual broadband devices at the subscriber site and the broadband remote access server (BRAS) in the access network.
VDSL Debut No. 2: Video over VDSL in a FRITZ! Cebit Preview
The second VDSL debut at AVM's Cebit stand presents a combination VDSL modem, router and direct connection to a TV set or high-definition display. Thanks to an integrated MPEG2/4 decoder, the VDSL access line can be connected to the TV set's SCART socket to play TV content or video on demand. The intensive VDSL data processing and the complex decoding of audiovisual data are performed entirely in the AVM device with a level of integration unknown up to now. For universal compatibility, the new product supports a variety of communication standards, including H.264/MPEG4 AVC, MPEG2 and MPEG1 Layer 3 (MP3) codecs. External devices can be connected to FBAS, S-Video, DVI-D, S/PDF, RCA, LAN, WLAN and USB 2.0 host ports.
Market Launch Coordinated with VDSL Offerings
The exact launch date for AVM's VDSL products will depend on the availability of the VDSL network and the VDSL offerings of national and international network operators and providers.
Contact:
Urban Bastert
Public Relations Office
AVM GmbH
Alt-Moabit 95, 10559 Berlin
http://www.avm.de
Fon +49 (0) 30 / 3 99 76 -214
Fax +49 (0) 30 / 3 99 76 -640
Mail u.bastert@avm.de
Original-Content von: AVM GmbH, übermittelt durch news aktuell